Issued on by Whittier 911 Flood Damage
Are you one of the many who are plagued about your damaged floor after it has been soaked with water? In that perception, the following are a few of the ways in solving this problem. Keep reading.
First, do everything that will make your floor dry. Open your windows, turn on fans and the likes. Don't stop until the floor is totally dry.
Secondly, if the water mastered to stain the wooden floor, you must eliminate the water stain from the affected area. To do this, you can make use of oxalic acid crystals. This substance will help you get rid of the stains effortlessly. Later on, you can cover it with polyurethane sealer.
A number of steps are necessary in fixing boards ruined by water. Removing the boards off the floor is the initial thing to do. You can make use of the saw in removing the board if you have a difficult time getting rid of it. When pulling the damaged boards up, you will need to utilize a pry. After taking out the damaged boards, you can now install new ones. You must ensure that you replace them with the same type and grade of board in order to complement it with the others.
Moreover, you have to sand the floor using a sander. You have to apply stain in the flooring for the floor to get the exact same color. Make sure that it is dry before proceeding. After staining the floor, you must apply two coats of polyurethane finish on it. Allow the first coat to dry before making use of the second coat. Avoid stepping on the floor for few hours. You will need to redo everything if you use the floor without ensuring that the coating has already dried.
There you go, if you think you can do it, give it a go.